For Installers
Protect Every Install from Day One
The Patent-Pending Slow Start Control helps installers bring a higher standard of professionalism to every aeration startup by managing compressor run time through a controlled 15-day ramp-up. Rather than leaving startup to the customer, it creates a more disciplined, engineered commissioning process that helps reduce the risk of fish kills associated with aggressive startup in stratified ponds.
The result is a more complete installation, a more confident customer handoff, and a smarter layer of protection for installers who want to reduce liability and protect the reputation behind every job.
Why Installers Use Slow Start Controls
A complete install is more than mounting equipment and leaving the customer with instructions. When startup goes wrong, customers rarely separate pond conditions from installation quality—they usually hold the installer responsible. Your reputation is attached to every startup, not just the hardware you install. By helping reduce preventable startup problems, Slow Start Controls help protect the trust, confidence, and credibility behind every completed job.
Built for Pond & Lake Professionals
- Better for Remote Installations
- Customer-Friendly Handoff
- No Manual Babysitting
- No Return Trip for Timer Removal
- Lower Startup Risk & Liability
- Day-Centering and Round-the-Clock Start Profiles
Installer Setup & Service Features
Features for Installers
- Easy Setup using only your Smartphone
- Installer Info page helps generate future service work
- Dedicated Installer login account
- Built-in Event Log for system troubleshooting
- Elapsed Time tracking for compressor service intervals
Don't Miss Out on Future Business
You can store your contact information directly in the controller's memory. Whenever filter or compressor service is needed, your contact information is displayed in the message box on the Customer Dashboard page. Future business and service work is directed back to you, not the competition.
Installer Sample Screenshots
Increase Your Bottom Line and Reduce Liability
Fast, Easy Setup
Field setup is easy by connecting your phone to the controller's built-in Wi-Fi. Programming can be done in advance at your shop or in the field during installation.
Fail Safe by Design
Our controllers are built with safety and reliability at the forefront. All models are built with Normally Closed Relays. If a failure were ever to occur, the compressor will still operate.
Saves Time & Money
The controller stores installer info which steers future service work back to you. It provides a fail-safe startup method that dramatically reduces callbacks and liability exposure.
No Return Trip
With old-fashioned time clocks, the installer would generally need to make a return trip to remove the timer and return the system to full-time operation. The Slow Start Control eliminates this return trip.
Any Installation, Any Brand - We've Got You Covered
Universal
The Universal version of our Slow Start Control is designed for use with any brand of aerator. Cords for both power in and load out allow for easy connection of both power and compressor. It is compatible with all types of compressors, including piston, diaphragm and rotary vane.
Integrated
The Integrated Slow Start is built specifically for the AC-Series Aerators that are manufactured by US Solar Mounts. It fits neatly inside the wiring compartment. Each unit is factory-installed and tested when your order is placed.
OEM
Our Patent-Pending Slow Start Controller is available in OEM form to other manufacturers through our Licensing Agreement Program. This version can also be used on applications where the need for an embedded controller exists.
Ready to improve your aeration startup process? Use the Universal Slow Start Control to reduce startup risk, improve customer handoff, and help protect the reputation behind every install.
If you have questions about using Slow Start Controls on customer installations, contact US Solar Mounts for assistance.
Contact Us
Frequently Asked Questions About Slow Start™
Search common questions about pond aeration startup, fish kill risk, Slow Start modes, installer use, and Universal Slow Start Control compatibility.
Showing 20 questions
1 What is a slow start controller for pond aeration?
A slow start controller manages aerator compressor runtime during startup instead of allowing full-time operation immediately. The Universal Slow Start Control gradually increases allowed compressor runtime over a controlled 15-day cycle, then returns the system to normal operation when the cycle is complete.
2 Can starting aeration too fast cause a fish kill?
Yes, in certain pond conditions. If a pond is stratified, stagnant, unmanaged, deep, or low in oxygen, starting bottom-diffused aeration at full runtime can mix low-oxygen bottom water and trapped gases upward too quickly. That sudden mixing can stress fish and increase the risk of an oxygen crash.
3 What is pond turnover?
Pond turnover is the mixing of water layers that have separated by temperature, oxygen level, or water quality. Turnover can happen naturally, but it can also be forced too quickly if bottom aeration is started aggressively in a stratified pond.
4 What happens when low-oxygen bottom water mixes too quickly?
When low-oxygen bottom water mixes upward too quickly, fish can be exposed to reduced oxygen levels and gases such as hydrogen sulfide or carbon dioxide. A controlled startup gives the pond time to adjust gradually instead of forcing immediate full-depth circulation.
5 When is a pond most at risk during aeration startup?
Risk is highest when a pond is stratified, older, unmanaged, deep, stocked with fish, restarted after extended downtime, or started during warm or hot weather. Those conditions make it more likely that deeper water contains low dissolved oxygen or trapped gases.
6 How long is the Slow Start startup cycle?
The Universal Slow Start Control uses a fixed 15-day startup cycle. Day 1 begins at 1.0% duty cycle, and the controller gradually increases allowed runtime until Day 15 reaches 100% duty cycle.
7 What happens after the 15-day Slow Start cycle is complete?
After the cycle is complete, the controller stops limiting runtime and returns the compressor to normal operation. This eliminates the need to remove a temporary startup timer or manually change runtime schedules after startup.
8 Does the Universal Slow Start Control require daily adjustment?
No. Once a Slow Start cycle is started, the controller automatically follows the 15-day progression. It is designed to replace manual timer changes, daily babysitting, and installer return trips for timer removal.
9 Is Slow Start useful for new pond aeration systems?
Yes. New aeration systems are one of the primary applications. Slow Start is useful when a pond has not been aerated before, when bottom water may be low in oxygen, or when the pond may be stratified.
10 Does Slow Start work on deep ponds?
Yes. Deep ponds are often good candidates for controlled startup because deeper water is more likely to stratify and may contain lower oxygen levels. A gradual startup helps reduce the risk of mixing that water upward too quickly.
11 Does Slow Start prevent all fish kills?
No aeration startup method can guarantee prevention of fish loss under every pond condition. Slow Start is intended to significantly reduce the risk associated with aggressive startup in stratified or low-oxygen ponds, but pond biology, weather, water quality, and fish condition still matter.
12 What is the difference between manual timer startup and automatic Slow Start?
Manual timer startup requires someone to set and change runtimes over time, then remove or reconfigure the timer after startup. Automatic Slow Start follows a built-in 15-day ramp-up curve and returns to normal compressor operation when complete.
13 What is Round-the-Clock Mode?
Round-the-Clock Mode spreads the allowed runtime across every hour. It is the default out-of-box mode and does not require the controller date and time to be set. On Day 1, the controller allows approximately 36 seconds of runtime per hour.
14 What is Day-Centering Mode?
Day-Centering Mode creates one operating window per day centered around midday. It is useful when startup runtime should be concentrated during the warmer, more biologically active part of the day. This mode requires the controller date and time to be set correctly.
15 Which Slow Start mode should I use?
Round-the-Clock Mode is the simplest choice and is the default because it does not require date and time setup. Day-Centering Mode is useful when you specifically want one daily run window centered around midday. For most basic plug-and-play use, Round-the-Clock Mode is the easiest starting point.
16 Does the controller need to be programmed?
Basic operation does not require programming. The Universal Slow Start Control is ready to use out of the box in Round-the-Clock Mode. For advanced settings, users can connect to the built-in Wi-Fi access point and web interface.
17 Can installers use Slow Start to reduce return trips?
Yes. Installers can use Slow Start as a repeatable commissioning process. Because the controller automatically ramps up and returns the system to normal operation, the installer does not need to return only to remove a temporary timer or update a manual schedule.
18 Why is Slow Start better than manually changing a timer every day?
Slow Start reduces guesswork, operator error, and forgotten timer changes. The controller follows the same engineered startup progression every time, stores cycle status, and automatically advances until full operation is reached.
19 Can Slow Start be added to an existing aeration system?
Yes, when the existing system is compatible. The Universal Slow Start Control is designed as a plug-and-play controller for standard 120V aeration systems up to 3/4 HP, using NEMA 5-15 power-in and load-out connections.
20 Does Slow Start replace a normal aerator timer?
During an active Slow Start cycle, the startup schedule controls compressor operation and the normal time clock function is disabled. After the cycle is complete or canceled, the controller returns to normal operation based on the current mode and timer settings.
No matching Slow Start FAQs found.
